i3 International S81 User Manual Download Page 145

Page: 145 / 205

144

DHCP Relay Statistics Parameters:

Items

Description

Server Statistics

Transmit to Server

The number of packets that are relayed from client to the server.

Transmit Error

The number of packets that resulted in errors while being sent to the clients.

Receive from Server

The number of packets received from the server.

Receive Missing Agent
Option

The number of packets received without agent information options.

Receive Missing Circuit ID

The number of packets received with the Circuit ID option missing.

Receive Missing Remote ID

The number of packets received with the Remote ID option missing.

Receive Bad Circuit ID

The number of packets whose Circuit ID option did not match known circuit ID.

Receive Bad Remote ID

The number of packets whose Remote ID option did not match known Remote ID.

Client Statistics

Transmit to Client

The number of relayed packets from server to the client

Transmit Error

The number of packets that resulted in error while being sent to the servers.

Receive from Client

The number of received packets from the server.

Receive Agent Option

The number of received packets with relay agent information options.

Replace Agent Option

The number of packets which were replaced with relay agent information options.

Keep Agent Option

The number of packets whose relay agent information was retained.

Drop Agent Option

The number of packets that were dropped which were received with relay agent information.

Buttons

Auto-refresh: Check this box to refresh the page automatically. It will do so every 3
seconds.
Refresh: Click to refresh the page.
Clear: Clears the counters.

Summary of Contents for S81














































































































































































































Search results

Summary of Contents for S81

Reviews:

Related manuals for S81

Brands by name

Popular brands

i3 International S81, User Manual

Search results

Summary of Contents for S81

Reviews:

Related manuals for S81

Brands by name

Popular brands