56
ALC Rate Limiter Configuration Parameters:
Items
Description
Rate Limiter
The rate limiter ID for the settings contained in the same row.
Rate
The allowed values are: 0-3276700 in pps or 0, 100, 200, 300... 1000000 in kbps.
Unit
Specify the rate unit. The allowed values are: pps: packets per second.
Kbps: Kilobits per second.
Access Control List
This section describes how to configure an Access Control List rule. An Access Control List (ACL) is a sequential list of permit
or deny conditions that apply to IP addresses, MAC addresses, or other more specific criteria. This switch tests ingress
packets against the conditions in an ACL one by one. A packet will be accepted as soon as it matches a permit rule, or
dropped as soon as it matches a deny rule. If no rules match, the frame is accepted. Other actions can also be invoked
when a matching packet is found, including rate limiting, copying matching packets to another port or to the system log, or
shutting down a port. This page shows the Access Control List (ACL), which is made up of the ACEs defined on this switch.
Each row describes the ACE that is defined. The maximum number of ACEs is 256 on each switch. Click on the lowest
plus sign to add a new ACE to the list. The reserved ACEs used for internal protocol, cannot be edited or deleted, the
order sequence cannot be changed the priority is highest.
To Configure Access Control Lists in the web interface:
•
Click Configuration / ACL / Configuration
•
Click the + button to add a new ACL, or use the other ACL modification buttons to specify the editing action (edit,
delete, or moving the relative position of entry in the list).
•
Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
•
When editing an entry on the ACI Configuration page note that the item displayed depends on various selections,
such as Frame Type and IP Protocol Type. Specify the relevant criteria to be matched for this rule and set the
actions to take when a rule is matched (such as Rate Limiter, Port Copy, Logging, and Shutdown.)
Summary of Contents for S81
Page 113: ...112 NOTE Click the Port index to set the QoS Egress Port Schedulers...
Page 117: ...116...
