i3 International S81, User Manual

Page: 23 / 205

22
Time Configuration Parameters:
Items Description
Clock Source There are two modes for configuring the Clock Source. Select “Use Local Settings”: The
Clock Source from Local Time. Select “Use NTP Server”: The Clock will Source from NTP
Server.
System Date Show the current time of the system. The year of system date limits between 2011 and
2037
Parameters System Date:
Time Zone
Lists various Time Zones worldwide. Select appropriate Time Zone from the drop down and
click Apply to set.
Acronym User can set the acronym of the time zone. This is a User configurable acronym to identify the
time zone. (Range: Up to 16 characters).
Daylight Saving Time Configuration:
Daylight Saving Time
This is used to set the clock forward or backward according to the configurations set below
for a defined Daylight Saving Time duration. Select 'Disable' to disable the Daylight Saving
Time configuration. Select 'Recurring' and configure the Daylight Saving Time duration to
repeat the configuration every year. Select 'Non-Recurring' and configure the Daylight
Saving Time duration for single time configuration. The default setting is Disabled.
Recurring Configuration:
Start time Settings
Week – Select the starting week number.
Day – Select the starting day number
Month – Select the starting month.
Hours – Select the starting hour.
Minutes – Select the starting minute.
End time Settings Week – Select the ending week number.
Day – Select the ending day number
Month – Select the ending month.
Hours – Select the ending hour.
Minutes – Select the ending minute.
Offset Settings Offset - Enter the number of minutes to add during Daylight Saving Time. (Range: 1 to 1440)