21
NTP Configuration Parameters:
Items
Description
Mode
Indicates the NTP mode operation. Possible modes are:
Enabled: Enable NTP client mode operation.
Disabled: Disable NTP client mode operation.
Server 1 to 5
Provide the NTP IPv4 or IPv6 address of this switch. IPv6 address is in 128-bit
represented as eight fields of up to four hexadecimal digits with a colon separating each
field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol ':’ is a special syntax that
can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros;
but it can only appear once. It can also represent a legally valid IPv4 address. For example,
'::192.0.0.10'.
Time
The switch provides manual and automatic ways to set the system time via NTP. For manual setting simply input “Year”,
“Month”, “Day”, “Hour” and “Minute” within the valid value range indicated in each item.
To configure Time in the web interface.
Click Configuration / System /Time
Specify the time related parameters.
Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
Summary of Contents for S81
Page 113: ...112 NOTE Click the Port index to set the QoS Egress Port Schedulers...
Page 117: ...116...
