127
GVRP Configuration Parameters:
Items
Description
Enable GVRP Globally
The GVRP feature is enabled by setting the check mark in the checkbox named Enable GVRP.
GVRP protocol timers
Join-time is a value in the range 1-20 in the units of centiseconds, i.e. in units of one
hundredth of a second. The default is 20.
Leave-time is a value in the range 60-300 in the units of centiseconds, i.e. in units of one
hundredth of a second. The default is 60.
Leave All-time is a value in the range 1000-5000 in the units of centi seconds, i.e. in units of
one hundredth of a second. The default is 1000.
Max number of VLANs
When GVRP is enabled a maximum number of VLANs supported by GVRP is specified. By
default this number is 20. This number can only be changed when GVRP is turned off.
GVRP Port Configuration
This page allows the configuration of the basic GVRP settings for all switch ports. The settings relate to the currently
selected unit, as reflected by the page header.
To configure the GVRP Ports in the web interface:
Click Configuration / GVRP / Port Config
Select Port number and specify the Mode.
Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
Summary of Contents for S81
Page 113: ...112 NOTE Click the Port index to set the QoS Egress Port Schedulers...
Page 117: ...116...
