152
Port Redirect
Indicate the port copy operation of the ACE. Frames matching the ACE are copied to the port
number. The allowed values are Disabled or a specific port number. When Disabled is
displayed, the port copy operation is disabled.
CPU
Forward packet that matched the specific ACE to CPU
CPU Once
Forward first packet that matched the specific ACE to CPU.
Counter
The counter indicates the number of times the ACE was hit by a frame
Conflict
Indicates the hardware status of the specific ACE. The specific ACE is not applied to the
hardware due to hardware limitations.
Buttons
Auto-refresh: Check this box to refresh the page automatically. It will do so every 3 seconds.
Refresh: Click to refresh the page.
ARP Inspection
This page displays the Dynamic ARP Inspection Table parameters of the switch. The Dynamic ARP Inspection Table contains
up to 1024 entries, and is sorted first by port, then by VLAN ID, then by MAC address, and then by IP address.
To Display the Dynamic ARP Inspection Table Configuration in the web interface:
Click Monitor / Security / Network / ARP Inspection
Specify the Start from port, VLAN ID, MAC Address, IP Address, and entries per page.
Check the Auto-Refresh check box to have the page automatically refresh every 3 seconds.
ARP Inspection Status Parameters:
Items
Description
Navigating the ARP
Inspection Table
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20,
selected through the "entries per page" input field. The "Start from port address", "VLAN",
"MAC address" and "IP address" input fields allow the user to select the starting point in the
Dynamic ARP Inspection Table. Clicking the button will update the displayed table starting from
that or the closest next Dynamic ARP Inspection Table match. In addition, the two input fields
will - upon a button click - assume the value of the first displayed entry, allowing for continuous
refresh with the same start address. This will use the last entry of the currently displayed table
as a basis for the next lookup. When the end is reached the text "No more entries" is shown in
the displayed table. Use the button to start over.
Port
Switch Port Number for which the entries are displayed.
VLAN ID
VLAN-ID in which the ARP traffic is permitted.
MAC Address
User MAC address of the entry.
IP Address
User IP address of the entry.
Buttons
Auto-refresh: Check this box to refresh the page automatically. It will do so every 3 seconds.
Refresh: Click to refresh the page.
<<: Updates the system log entries to the first available entry ID.
>: Updates the system log entry to the next available entry ID.
Summary of Contents for S81
Page 113: ...112 NOTE Click the Port index to set the QoS Egress Port Schedulers...
Page 117: ...116...