5-7
Positioning the Patient
032-0329-EN Rev K
To Install Velcro Pads:
1. Loosen the locking knob and remove the head
support.
2. Attach pads and, if necessary, trim to fit.
3. Insert head support and tighten locking knob.
To Use the Head Strap:
1. Attach one end of the head strap to one side of
the head support.
2. Wrap head strap around patient’s forehead and
secure to other side of head support.
For scans that are specific to TMJ or orthodontics, only the head support and head strap
should be used. It is recommended that the chin support not be used because it can affect
the Condylar position in Fossa and interfere with soft tissue at the chin.
NOTE:
The gantry does not move into position for a selected protocol until the Scan button
is pressed. The crosshair laser may not be beneficial to patient positioning until a Scout or
Scan has been performed for the selected protocol.
Velcro Pads
Summary of Contents for FLX V Series
