![background image](http://html2.mh-extra.com/html/i-cat/flx-v-series/flx-v-series_user-manual_3073471086.webp)
A-2
i-CAT FLX User Manual
032-0329-EN Rev K
•
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
•
No modification of this scanner is allowed except by parties that are authorized by
the manufacturer. Use only the software and hardware provided with the scanner.
•
Do not remove covers or cables on scanner or operate the scanner with any covers
open or removed. High voltage is present in the scanner. Operating the scanner
with open or removed covers could expose mechanical operating systems or
increase risk of electrical shock that could cause serious or fatal personal injury to
the operator or the patient. Only qualified and authorized service personnel should
remove covers from the scanner.
•
To avoid any potential hazard or danger to operators and patients, contact your
authorized Service Representative immediately if you experience any unusual
operation, non-recoverable faults, or equipment malfunctions or failures.
•
Laser beams can cause optical damage. Instruct the patient to close eyes to avoid
looking into the beam.
•
Viewing the laser output with certain optical instruments (for example, eye lopes,
magnifiers and microscopes) within a distance of 100 mm may pose an eye hazard.
Viewing the laser output with certain optical instruments designed for use at a
distance (for example, telescopes and Binoculars) may pose an eye hazard.
•
Always follow the manufacturer’s instructions for proper use and cleaning of the
scanner to prevent cross contamination among patients.
•
Do not allow liquids in the vicinity of the scanner.
•
Closing the gate creates a pinch point. Keep hands and other body parts clear when
closing gate.
•
To avoid the risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
•
In the event of an electrical fire, only use extinguishers that are labeled for that
purpose. Using water or other liquids on an electrical fire can lead to fatal or serious
personal injury.
•
In the event of an electrical fire, to reduce the risk of electrical shock, try to isolate
the equipment from the electric source before attempting to extinguish the fire.
•
Equipment not suitable for use in the presence of a flammable anesthetic mixture
with air or with nitrous or oxygen enriched atmospheres.
Summary of Contents for FLX V Series
