2-2
i-CAT FLX User Manual
032-0329-EN Rev K
Scanner Startup
The scanner and scanner controller are powered independently, Both must be on to function
properly and are available for use immediately after startup. No warm up is required.
Power Up
1.
Power up the scanner
: press the ON button on the operator control
box. The POWER indicator on the operator control box and scanner
should light.
2.
Power up scanner controller and touch screen:
press the power
button on the front of the scanner controller. The log in screen is
displayed.
CAUTION
If the scanner or the scanner controller is powered off, at scanner power up or scanner
controller boot up, when the first scan is initiated (scout or full scan), the system
performs a reset procedure that may delay the start of first scan.
Log in
To log in to SmartScan STUDIO
on the touch screen:
1. Enter your user name and password.
2. Press
to log in. Scheduled Exams are displayed.
Summary of Contents for FLX V Series
