![background image](http://html2.mh-extra.com/html/i-cat/flx-v-series/flx-v-series_user-manual_3073471015.webp)
3-1
032-0329-EN Rev K
Chapter
3
Scheduling a Patient Exam
Introduction
Depending on your site’s workflow, you may use SmartScan STUDIO Manager, DEXIS software,
Practice Management (PM) software, or SmartScan STUDIO Modality Worklist software to
schedule patient exams.
Using SmartScan STUDIO Manager to Schedule a Patient Exam
Using SmartScan STUDIO Manager at the clinical workstation, you can schedule a new patient
for an exam or select an existing patient to schedule a new exam. If you need to modify any
patient data after it has been entered and saved, contact your site administrator.
Schedule a New Patient for an Exam
1. At the clinical workstation, start
SmartScan STUDIO Manager.
2. Select
New Exam for a New
Patient
.
3. Enter data for the patient and exam.
At a minimum, Patient ID and Family
Name must be completed. If a Patient
ID is entered that is already in use, a
Duplicate Patient ID message is
displayed.
NOTE:
Entries added to the drop-down
menus are only stored on the local
workstation. They will not display on
another workstation unless they are
added to that workstation.
Summary of Contents for FLX V Series
