Hyundai ELANTRA 2019 Owner'S Manual Download

Page: 132 / 568

3-54

Distance to empty

• The distance to empty is the esti-

mated distance the vehicle can be
driven with the remaining fuel.

• If the estimated distance is below

1 km (1 mi.), the trip computer will
display “---” as distance to empty.

Information

• If the vehicle is not on level ground

or the battery power has been inter-
rupted, the distance to empty func-
tion may not operate correctly.

• The distance to empty may differ

from the actual driving distance as
it is an estimate of the available
driving distance.

• The trip computer may not register

additional fuel if less than 6 liters
(1.6 gallons) of fuel are added to the
vehicle.

• The distance to empty may vary sig-

nificantly based on driving condi-
tions, driving habits, and condition
of the vehicle.

Transmission shift indicator

Manual transmission shift indi-
cator (if equipped)

This indicator informs which gear is
recommended while driving, to save
fuel.
• Shifting up :

▲

• Shifting down :

▼

For example

: Indicates that shifting up to the

3rd gear is recommended (cur-
rently the shift lever is in the
2nd or 1st gear).

Convenient features of your vehicle

OAD048563N

■

Supervision cluster

■

Conventional cluster

■

Supervision cluster

OAD045117/OAD048557N

Summary of Contents for ELANTRA 2019

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands

Hyundai ELANTRA 2019, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands