Hyundai ELANTRA 2019 Owner'S Manual Download Page 326

Page: 326 / 568

5-49

Dri
ving y

our v

ehicle

RIIV

E M

E IIN

D C

L S

M ((IIF

F E

UIIP

D))

Drive mode

The drive mode may be selected
according to the driver's preference
or road condition.

Information

If there is a problem with the instru-
ment cluster, the drive mode will be in
NORMAL mode and may not change
to ECO mode or SPORT mode.

The mode changes, as below,
whenever the DRIVE MODE button
is pressed.

When NORMAL mode is selected, it
is not displayed on the instrument
cluster.

ECO mode

When the Drive Mode is
set to ECO mode, the
engine and transmission
control logic are changed
to maximize fuel efficiency.

• When the ECO mode is selected by

pressing the DRIVE MODE button,
the ECO indicator will illuminate.

• Whenever the engine is restarted,

the drive mode remains in ECO
mode.

Information

Fuel efficiency depends on the driver's
driving habit and road condition.

ECO

NORMAL SMART SPORT

OAD058016L

Summary of Contents for ELANTRA 2019

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands

Hyundai ELANTRA 2019, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands