Hyundai ELANTRA 2019 Owner'S Manual Download Page 237

Page: 237 / 568

Steering wheel audio control
(if equipped)

The steering wheel audio control
switches are installed for your con-
venience.

Do not operate audio remote con-
trol buttons simultaneously.

VOLUME (VOL + / - ) (1)

• Move the VOLUME toggle switch

up to increase volume.

• Move the VOLUME toggle switch

down to decrease volume.

SEEK/PRESET (

) (2)

If the SEEK/PRESET toggle switch
is moved up or down and held for 0.8
second or more, it will function in the
following modes.

RADIO mode

It will function as the AUTO SEEK
select switch. It will SEEK until you
release the switch.

MEDIA mode

It will function as the FF/REW switch.

If the SEEK/PRESET toggle switch
is moved up or down, it will function
in the following modes.

RADIO mode

It will function as the PRESET STA-
TION UP/DOWN switch.

MEDIA mode

It will function as the TRACK UP/
DOWN switch.

MODE (

) (3)

Press the MODE button to select
Radio or AUX.

MUTE (

) (4)

• Press the button to mute the

sound.

• Press the button again to activate

the sound.

Information

Detailed information for audio control
buttons are described in the following
pages in this chapter.

NOTICE

4-4

Multimedia System

OAD048446L

■

Type A

■

Type B

OAD048542L

■

Type C

■

Type D

Summary of Contents for ELANTRA 2019

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands

Hyundai ELANTRA 2019, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands