Hyundai ELANTRA 2019 Owner'S Manual Download Page 272

Page: 272 / 568

4-39

Multimedia System

DIIO

O S

M S

CIIF

FIIC

TIIO

USB

Supported audio formats

• Audio file specification

- WAVeform audio format
- MPEG1/2/2.5 Audio Layer3
- Windows Media Audio Ver

7.X/8.X

• Bit rates

- MPEG1 (Layer3):

32/40/48/56/64/80/96/112/128/
160/192/224/256/320 kbps

- MPEG2 (Layer3):

8/16/24/32/40/48/56/64/80/96/
112/128/144/160 kbps

- MPEG2.5 (Layer3):

8/16/24/32/40/48/56/64/80/96/
112/128/144/160 kbps

- WMA (High Range):

48/64/80/96/128/160/192 kbps

• Bits Per Sample

- WAV (PCM(Stereo)): 24 bit
- WAV (IMA ADPCM): 4 bit
- WAV (MS ADPCM): 4 bit

• Sampling frequency

- MPEG1: 44100/48000/32000 Hz
- MPEG2: 22050/24000/16000 Hz
- MPEG2.5: 11025/12000/8000 Hz
- WMA: 32000/44100/48000 Hz
- WAV: 44100/48000 Hz

• Maximum length of folder/file

names (Based on Unicode): 40
English or Korean characters

• Supported characters for folder/file

names (Unicode support): 2,604
Korean characters, 94 alphanu-
meric characters, 4,888 Chinese
characters in common use, 986
special characters

• Maximum number of folders: 1,000
• Maximum number of files: 5,000

• Files that are not in a supported

format may not be recognised or
played, or information about
them, such as the file name, may
not be displayed properly.

• Only files with .mp3/.wma/.wav

extensions can be recognised
by the system. If the file is not in
supported format, change the
file format by using the latest
encoding software.

• The device will not support files

locked by DRM (Digital Rights
Management).

• For MP3/WMA compression files

and WAV file, differences in
sound quality will occur depend-
ing on the bitrate. (Music files
with a higher bitrate have a bet-
ter sound quality.)

• Japanese or Simplified Chinese

characters in folder or file
names may not be displayed
properly.

NOTICE

Summary of Contents for ELANTRA 2019

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands

Hyundai ELANTRA 2019, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands