Hyundai ELANTRA 2019, Owner'S Manual

Page: 369 / 568

5-92
Driving your vehicle
• When the system is initially turned
on and when the engine is turned
off then on again, the warning light
will illuminate for 3 seconds on the
outside rearview mirror.
• The driver can select the initial
warning activation time in the User
Settings in the LCD display by
selecting 'User Settings
→
Driver
Assistance
→
Warning Timing'.
The options for the initial Rear
Cross-Traffic Collision Warning
includes the following:
- Normal:
When this condition is selected, the
initial Rear Cross-Traffic Collision
Warning is activated normally. If this
setting feels sensitive, change the
option to 'Later'.
The warning activation time may feel
late if a vehicle at the side or rear
abruptly accelerates.
- Later:
Select this warning activation time
when the traffic is light and you are
driving in a low speed.
Information
If you change the warning timing, the
warning time of other systems may
change. Always be aware before
changing the warning timing.
Operating conditions
To operate:
1. Go to the 'User Settings
→
Driver
Assistance
→
Blind-Spot Safety
→
Rear Cross-Traffic Safety' on the
LCD display. The system will turn
on and standby to activate.
2. The system will activate when vehi-
cle speed is below 10 km/h (7 mph)
and with the shift lever in R
(Reverse).
* The system will not activate
when the vehicle speed exceeds
10 km/h (7 mph). The system will
activate again when the speed is
below 10 km/h (7 mph).
The system's detecting range is
approximately 0.5 m ~ 20 m (1 ft ~ 65
ft). An approaching vehicle will be
detected if their vehicle speed is
within 8 km/h ~ 36 km/h (5 ~ 22.5
mph).
Note that the detecting range may
vary under certain conditions. As
always, use caution and pay close
attention to your surroundings when
backing up your vehicle.
i
OTMA058089