Hyundai ELANTRA 2019 Owner'S Manual Download Page 484

Page: 484 / 568

Information

If the vehicle is operated in extremely
dusty or sandy areas, replace the ele-
ment more often than the usual rec-
ommended intervals (refer

“Maintenance Under Severe Usage
Conditions” in this chapter).

• Do not drive with the air cleaner

filter removed. This will result in
excessive engine wear.

• When removing the air cleaner

filter, be careful that dust or dirt
does not enter the air intake, or
damage may result.

• Use HYUNDAI genuine parts.

Use of non-genuine parts could
damage the engine.

NOTICE

7-32

Maintenance

Summary of Contents for ELANTRA 2019

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands

Hyundai ELANTRA 2019, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands