Hyundai ELANTRA 2019 Owner'S Manual Download Page 156

Page: 156 / 568

3-78

Convenient features of your vehicle

Items

Explanation

SCC Response

• Fast/Normal/Slow

To adjust the sensitivity of the Smart Cruise Control system.

For more details, refer to ''Smart Cruise Control'' in chapter 5.

Driver Attention Warning

• High sensitivity / Normal sensitivity / Off
To adjust the sensitivity of the Driver Attention Warning.

For more details, refer to the "DAW (Driver Attention Warning)" in chapter 5.

Warning Timing

• Normal / Later
To select when to provide a warning for all driver assistance.

Forward Safety

• Active Assist: If selected, the system controls the vehicle and provides a warning when a collision is

detected.

• Warning Only: If selected, the system provides a warning when a collision is detected.
• Off: Deactivates the system.

For more details, refer to the "Forward Collision-Avoidance Assist system" in chapter 5.

Lane Safety

• Lane Keeping Assist : If selected, the system controls the vehicle and provides a warning when the

vehicle leaves the lane.

• Lane Departure Warning: If selected, the system provides a warning when the vehicle leaves the

lane.

• Off: Deactivates the LKA system.

For more details, refer to the "Lane Keeping Assist (LKA) System" in chapter 5.

1. Driver Assistance

❈

The information provided may differ depending on which functions are applicable to your vehicle.

Summary of Contents for ELANTRA 2019

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands

Hyundai ELANTRA 2019, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2019

Reviews:

Related manuals for ELANTRA 2019

Brands by name

Popular brands