Hyundai ELANTRA 2019 Owner'S Manual Download Page 134 | Manualshive

Page: 134 / 568

background image

3-56

Convenient features of your vehicle

Warning and indicator lights

Information

Make sure that all warning lights are
OFF after starting the engine. If any
light is still ON, this indicates a situa-
tion that needs attention.

Air Bag Warning Light

This warning light illuminates:

• When you set the ignition switch or

the Engine Start/Stop button to the
ON position.
- It illuminates for approximately 6

seconds and then goes off.

• When there is a malfunction with

the SRS.
In this case, we recommend that
you have the vehicle inspected by
an authorized HYUNDAI dealer.

Seat Belt Warning Light

This warning light informs the driver
that the seat belt is not fastened.

For more details, refer to “Seat
Belts” in chapter 2.

Parking Brake & Brake
Fluid Warning Light

This warning light illuminates:

• When you set the ignition switch or

the Engine Start/Stop button to the
ON position.
- It illuminates for approximately 3

seconds

- It remains on if the parking brake

is applied.

• When the parking brake is applied.
• When the brake fluid level in the

reservoir is low.
- If the warning light illuminates

with the parking brake released, it
indicates the brake fluid level in
the reservoir is low.

If the brake fluid level in the reser-
voir is low:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the engine stopped, check the

brake fluid level immediately and
add fluid as required

(For more

details, refer to “Brake Fluid” in
chapter 7)

. After adding brake

fluid, check all brake components
for fluid leaks. If a brake fluid leak is
found, or if the warning light
remains on, or if the brakes do not
operate properly, do not drive the
vehicle. We recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer.

Dual-diagonal braking system

Your vehicle is equipped with dual-
diagonal braking systems. This
means you still have braking on two
wheels even if one of the dual sys-
tems should fail.
With only one of the dual systems
working, more than normal pedal
travel and greater pedal pressure are
required to stop the vehicle.

i

«
...
132
133
134
135
136
...
»

Summary of Contents for ELANTRA 2019

























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ELANTRA 2019

Brand: Camoplast Pages: 60

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

Brand: Oldsmobile Pages: 360

Brand: Camcar Pages: 2

Wireless Handsfree Car Kit

Brand: Wagan Pages: 20

Brand: Cadillac Pages: 34

Brand: VER-MAC Pages: 64

Brand: Mobility Networks Pages: 52

Brand: Guidosimplex Pages: 8

ULTIMATE SPEED 296713

Brand: walser Pages: 10

Brand: Mercedes-Benz Pages: 373

Brand: Prorack Pages: 13

Brand: Pyle Pages: 14

Brand: Scosche Pages: 32

Brand: SAAS Pages: 3

Brand: Nuna Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands