manualshive.com logo in svg

Hyundai Accent 2012, Owner'S Manual

The Hyundai Accent 2012 Owner's Manual is a comprehensive guide that helps you understand and operate your vehicle effortlessly. Our manualshive.com allows you to easily download this manual for free, providing you with instant access to valuable information and instructions for your Hyundai Accent 2012 experience.

Share
Download
background image

Features of your vehicle

18

4

Auto down window (if equipped) 
(driver’s window)

Pressing the power window switch
momentarily to the second detent posi-
tion (6) completely lowers the driver’s
window even when the switch is
released. To stop the window at the
desired position while the window is in
operation, momentarily pull the switch in
the direction opposite of the window
movement.

Power window lock button

• The driver can disable the power win-

dow switches on all front and rear pas-
senger doors by pressing the power
window lock button located on the dri-
ver’s door to the LOCK position
(pressed).

• When the power window lock button

is in the LOCK position (pressed),
the driver’s master control cannot
operate the front and rear passen-
ger door power windows.

ORBC040093

ORB040009

CAUTION

• To prevent possible damage to

the power window system, do not
open or close two windows or
more at the same time. This will
also ensure the longevity of the
fuse.

• Never try to operate the main

switch on the driver's door and
the individual door window
switch in opposing directions at
the same time. If this is done, the
window will stop and cannot be
opened or closed.

Summary of Contents for Accent 2012



















































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2012

Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Code 3 WingMan Installation & Operation Manual preview
WingMan
Brand: Code 3 Pages: 8
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
v.LOGiC V5-CIC-E-PNP Manual preview
V5-CIC-E-PNP
Brand: v.LOGiC Pages: 22
Skoda Fabia Combi 5J Fitting Instructions preview
Fabia Combi 5J
Brand: Skoda Pages: 2
Brink 4698 Fitting Instructions Manual preview
4698
Brand: Brink Pages: 26
Volvo 30661683 Installation Instructions, Accessories preview
30661683
Brand: Volvo Pages: 18
Buick Riviera 1967 Owner'S Manual preview
Riviera 1967
Brand: Buick Pages: 58
Chevrolet 2003 TraiIBIazer Owner'S Manual preview
2003 TraiIBIazer
Brand: Chevrolet Pages: 426
Chevrolet 2003 S10 Pickup Owner'S Manual preview
2003 S10 Pickup
Brand: Chevrolet Pages: 434
AKE PB-HC2 Quick Start Manual preview
PB-HC2
Brand: AKE Pages: 2
Lampa SnowDrive Pilot-Pro 16270 Fitting Instructions Manual preview
SnowDrive Pilot-Pro 16270
Brand: Lampa Pages: 32
Guardsman MG4 Fitting Instruction preview
MG4
Brand: Guardsman Pages: 2
Guardsman G1587 Fitting Instruction preview
G1587
Brand: Guardsman Pages: 3

Brands by name

Popular brands

Load more brands