manualshive.com logo in svg

Hyundai Accent 2012, Owner'S Manual

The Hyundai Accent 2012 Owner's Manual is a comprehensive guide that helps you understand and operate your vehicle effortlessly. Our manualshive.com allows you to easily download this manual for free, providing you with instant access to valuable information and instructions for your Hyundai Accent 2012 experience.

Share
Download
background image

Features of your vehicle

66

4

Fan speed control

The ignition switch must be in the ON
position for fan operation.
The fan speed control knob allows you to
control the fan speed of the air flowing
from the ventilation system. To change
the fan speed, turn the knob to the right
for higher speed or left for lower speed.
Setting the fan speed control knob to the
“0” position turns off the fan.

Air conditioning 

Press the A/C button to turn the air con-
ditioning system on (indicator light will
illuminate). Press the button again to turn
the air conditioning system off.

ORB040073N

ORB040354N

WARNING

• Continue using the climate con-

trol system in the recirculated air
position may allow humidity to
increase inside the vehicle which
may fog the glass and obscure
visibility.

• Do not sleep in a vehicle with the

air conditioning or heating sys-
tem on. It may cause serious
harm or death due to a drop in the
oxygen level and/or body temper-
ature.

• Continue using the climate control

system in the recirculated air
position can cause drowsiness or
sleepiness, and loss of vehicle
control. Set the air intake control
to the outside (fresh) air position
as much as possible while driving.

Summary of Contents for Accent 2012



















































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2012

UltraGauge EM Installation & Operation Manual preview
EM
Brand: UltraGauge Pages: 55
Yutrax TX107 Operator'S Manual preview
TX107
Brand: Yutrax Pages: 8
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
iArmor EDGE IA-W208 Manual preview
EDGE IA-W208
Brand: iArmor Pages: 6
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
ORA XL MIRROR Installation Instructions Manual preview
XL MIRROR
Brand: ORA Pages: 7
Peiying PY0101 Owner'S Manual preview
PY0101
Brand: Peiying Pages: 32
Hyundai 2001 Elantra Owner'S Manual preview
2001 Elantra
Brand: Hyundai Pages: 168
CITROEN 1953 Traction Avant User Manual preview
1953 Traction Avant
Brand: CITROEN Pages: 26
Westin Sportsman 40-0125 Installation Instructions preview
Sportsman 40-0125
Brand: Westin Pages: 2
Yakima RIpCord Manual preview
RIpCord
Brand: Yakima Pages: 12
Chrysler 200 2011 Brochure & Specs preview
200 2011
Brand: Chrysler Pages: 17
Honda 2013 Pilot Touring Reference Manual preview
2013 Pilot Touring
Brand: Honda Pages: 18
AKE PB-HC2 Quick Start Manual preview
PB-HC2
Brand: AKE Pages: 2
BMW M5 Owner'S Manual preview
M5
Brand: BMW Pages: 102
Honda 2012 Fit Navigation Manual preview
2012 Fit
Brand: Honda Pages: 199

Brands by name

Popular brands

Load more brands