manualshive.com logo in svg

Hyundai Accent 2012, Owner'S Manual

The Hyundai Accent 2012 Owner's Manual is a comprehensive guide that helps you understand and operate your vehicle effortlessly. Our manualshive.com allows you to easily download this manual for free, providing you with instant access to valuable information and instructions for your Hyundai Accent 2012 experience.

Share
Download
background image

Driving your vehicle

28

5

To set cruise control speed:

1. Push the cruise ON-OFF button on the

steering wheel to turn the system on.
The CRUISE indicator light in the
instrument cluster will illuminate.

2. Accelerate to the desired speed, which

must be more than 25 mph (40 km/h).

3. Push the SET- switch, and release it at

the desired speed. The SET indicator
light in the instrument cluster will illumi-
nate. Release the accelerator at the
same time. The desired speed will auto-
matically be maintained.

On a steep grade, the vehicle may  slow
down or speed up slightly while going
uphill or downhill.

To increase cruise control set
speed:

Follow either of these procedures:
• Push the RES+ switch and hold it. Your

vehicle will accelerate. Release the
switch at the speed you want.

• Push the RES+ switch and release it

immediately. The cruising speed will
increase 1.0 mph (1.6 km/h) each time
the  RES+ switch is operated in this
manner.

ORB051033N

ORB051032N

ORB051030N

Summary of Contents for Accent 2012



















































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2012

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
GMC SIERRA 2019 Getting To Know Your preview
SIERRA 2019
Brand: GMC Pages: 20
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
Whispbar K934W Fitting Instructions Manual preview
K934W
Brand: Whispbar Pages: 15
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
TATA Motors tigor Owner'S Manual preview
tigor
Brand: TATA Motors Pages: 159
Maserati Quattroporte Automatic Owner'S Manual preview
Quattroporte Automatic
Brand: Maserati Pages: 272
Motoalliance VIPER MA11922 Install Instructions Manual preview
VIPER MA11922
Brand: Motoalliance Pages: 8
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102

Brands by name

Popular brands

Load more brands