manualshive.com logo in svg

Hyundai Accent 2012, Owner'S Manual

The Hyundai Accent 2012 Owner's Manual is a comprehensive guide that helps you understand and operate your vehicle effortlessly. Our manualshive.com allows you to easily download this manual for free, providing you with instant access to valuable information and instructions for your Hyundai Accent 2012 experience.

Share
Download
background image

4 43

Features of your vehicle

✽

✽

NOTICE

If the ABS warning light or EBD warn-
ing light is on and stays on, the
speedometer

or

odometer/tripmeter

may not work. In this case, have your
vehicle checked by an authorized
HYUNDAI dealer as soon as possible.

Seat belt warning 

The driver's seat belt warning light and
chime will activate to the following table
when the ignition switch is in "ON" posi-
tion.

*

1

Warning pattern repeats 11 times with
interval 24 seconds. If the driver's seat
belt is buckled, the light will stop within
6 seconds and chime will stop immedi-
ately.

*

2

The light will stop within 6 seconds and
chime will stop immediately.

Turn signal indicator

The blinking arrows on the instrument
panel show the direction indicated by the
turn signals. If the arrow comes on but
does not blink, blinks more rapidly than
normal, or does not illuminate at all, a
malfunction in the turn signal system is
indicated. Your dealer should be consult-
ed for repairs.

High beam indicator 

This indicator illuminates when the head-
lights are on and in the high beam posi-
tion or when the turn signal lever is pulled
into the Flash-to-Pass position.

Tail light indicator 

This indicator illuminates when the tail
lights are on.

Conditions

Warning Pattern

Seat Belt

Vehicle

Speed

Light-Blink

Chime-

Sound

Unbuckled

6 seconds

Buckled

6 seconds

None

Buckled 

→

Unbuckled

Below 3 mph

(5 km/h)

6 seconds

None

3 mph~

6 mph

6 seconds

Above 6 mph 

(10 km/h)

6 sec. on / 24 sec. off 

(11 times)

Unbuckled

Above 6 mph

(10 km/h)

↓

Below 3 mph 

(5 km/h)

6 seconds *

1

↓

Stop *

2

Summary of Contents for Accent 2012



















































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2012

A-Tach Mounts 50131 Instructions preview
50131
Brand: A-Tach Mounts Pages: 2
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Brand: FORM FIT Pages: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Brand: Thule Pages: 12
iDataLink BLADE-AL(TB)-TL2 Install Manual preview
BLADE-AL(TB)-TL2
Brand: iDataLink Pages: 9
Magneti Marelli BCF184 Installation Instructions preview
BCF184
Brand: Magneti Marelli Pages: 2
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
Cadillac 1997 Catera Owner Assistance Information preview
1997 Catera
Brand: Cadillac Pages: 34
Fab Fours VI-COWL Installation Instructions Manual preview
VI-COWL
Brand: Fab Fours Pages: 19
Sanitas SMG 245 Instructions For Use Manual preview
SMG 245
Brand: Sanitas Pages: 36
Power Acoustik METER 4 Installation preview
METER 4
Brand: Power Acoustik Pages: 4
Paccar PACCHARGE AC20 Installation Manual preview
PACCHARGE AC20
Brand: Paccar Pages: 63
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
Volvo 30795637 User Manual preview
30795637
Brand: Volvo Pages: 92
Skoda FABIA II TMB PS 035 Mounting And User Instructions preview
FABIA II TMB PS 035
Brand: Skoda Pages: 16
ECS Electronics CT-050-B1 Fitting Instructions Manual preview
CT-050-B1
Brand: ECS Electronics Pages: 42
Mazda 2006 MPV Quick Tips preview
2006 MPV
Brand: Mazda Pages: 14
Honda 2001 Accord Sedan Owner'S Manual preview
2001 Accord Sedan
Brand: Honda Pages: 372

Brands by name

Popular brands

Load more brands