Hyundai Accent 2012 Owner'S Manual Download Page 173

Page: 173 / 370

4 95

Features of your vehicle

Using RADIO, SETUP, VOLUME
and AUDIO CONTROL

Button

Turns to FM mode and toggles FM1 and
FM2 when the button is pressed each
time.

Button

Pressing the

button selects the

AM band. AM Mode is displayed on the
LCD.

Button

• When the

is pressed, it will

automatically tune to the next lower
station.

• When the

is pressed, it will

automatically tune to the next higher
station.

Button &

Knob

• Turns the audio system on/off when

the ignition switch is on ACC or ON.

• If the knob is turned clockwise/counter-

clockwise, the volume will increase
/decrease.

5. PRESET Buttons

• Press ~

buttons

less

than 0.8 seconds to play the station
saved in each button.

• Press

buttons more

than 0.8 seconds or longer to save the
current station to the respective button
with a beep.

Button

• When the button is pressed, it auto-

matically scans the radio stations
upwards.

• The SCAN feature steps through each

station, starting from the initial station,
for 5 seconds.

• Press the

button again to stop

the scan feature and to listen to the
currently selected channel.

Button

Turn the LCD Display & Backlight ON/OFF
when button

press.

DISP

DISP

SCAN

SCAN

VOLUME

POWER

SEEK

TRACK

SEEK

TRACK

SEEK

PA710RB_RADIO

Summary of Contents for Accent 2012



















































































































































































































































































































































































Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands

Hyundai Accent 2012, Owner'S Manual

Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands