manualshive.com logo in svg

Hyundai Accent 2012, Owner'S Manual

The Hyundai Accent 2012 Owner's Manual is a comprehensive guide that helps you understand and operate your vehicle effortlessly. Our manualshive.com allows you to easily download this manual for free, providing you with instant access to valuable information and instructions for your Hyundai Accent 2012 experience.

Share
Download
background image

6 29

What to do in an emergency

• Use a towing strap less than 16 feet (5

m) long. Attach a white or red cloth
(about 12 inches (30 cm) wide) in the
middle of the strap for easy visibility.

• Drive carefully so that the towing strap

is not loosened during towing.

✽

✽

NOTICE

Emergency towing is not legal in all
states. Contact an authorized
HYUNDAI dealer and tow the vehicle.

Emergency towing precautions

• Turn the ignition switch to ACC so the

steering wheel isn’t locked.

• Place the transaxle shift lever in N

(Neutral).

• Release the parking bake.
• Press the brake pedal with more force

than normal since you will have
reduced brake performance.

• More steering effort will be required

because the power steering system
will be disabled.

• If you are driving down a long hill, the

brakes may overheat and brake per-
formance will be reduced. Stop often
and let the brakes cool off.

CAUTION - 

Automatic
transaxle

• If the car is being towed with all

four wheels on the ground, it can
be towed only from the front. Be
sure that the transaxle is in neu-
tral. Be sure the steering is
unlocked by placing the ignition
switch in the ACC position. A
driver must be in the towed vehi-
cle to operate the steering and
brakes.

• To avoid serious damage to the

automatic transaxle, limit the
vehicle speed to 10 mph (15 km/h)
and  drive less than 1 mile (1.5
km) when towing.

• Before towing, check the auto-

matic transaxle fluid leak under
your vehicle. If the automatic
transaxle fluid is leaking,

a

flatbed equipment or towing dolly
must be used.

OTD069011

Summary of Contents for Accent 2012



















































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2012

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
UltraGauge EM Installation & Operation Manual preview
EM
Brand: UltraGauge Pages: 55
Jackco SHARP ALIGN User Manual preview
SHARP ALIGN
Brand: Jackco Pages: 11
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
GMC 2005 Sierra Denali Owner'S Manual preview
2005 Sierra Denali
Brand: GMC Pages: 428
Mercedes-Benz GLA 250 2019 Operator'S Manual preview
GLA 250 2019
Brand: Mercedes-Benz Pages: 346
Thule Kit 1514 Instructions preview
Kit 1514
Brand: Thule Pages: 4
Webasto Transit Vancouver Wagon Manual preview
Transit Vancouver Wagon
Brand: Webasto Pages: 44
Renault 2016 Sandero Stepway Handbook preview
2016 Sandero Stepway
Brand: Renault Pages: 183
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
BMW 323Ci Manual preview
323Ci
Brand: BMW Pages: 189
Mercedes-Benz Sprinter 2003 Manual preview
Sprinter 2003
Brand: Mercedes-Benz Pages: 296
Bestop 51252 Installation Instructions preview
51252
Brand: Bestop Pages: 4
Poison Spyder TrailGate TJ Installation Instructions preview
TrailGate TJ
Brand: Poison Spyder Pages: 5
Ford 2000 F 350 Owner'S Manual preview
2000 F 350
Brand: Ford Pages: 256
Guardsman G14776S Fitting Instruction preview
G14776S
Brand: Guardsman Pages: 2
Coulomb Technologies ChargePoint CT500-DSTAND Installation Manual preview
ChargePoint CT500-DSTAND
Brand: Coulomb Technologies Pages: 26

Brands by name

Popular brands

Load more brands