manualshive.com logo in svg

Hyundai Accent 2012, Owner'S Manual

The Hyundai Accent 2012 Owner's Manual is a comprehensive guide that helps you understand and operate your vehicle effortlessly. Our manualshive.com allows you to easily download this manual for free, providing you with instant access to valuable information and instructions for your Hyundai Accent 2012 experience.

Share
Download
background image

4 57

Features of your vehicle

Rear window wiper and washer
switch (if equipped)

The rear window wiper and washer
switch is located at the end of the  wiper
and washer switch lever. Turn the switch
to desired position to operate the rear
wiper and washer.

- Spraying washer fluid and wiping

ON - Normal wiper operation

OFF - Wiper is not in operation

Automatic turn off function 
(if equipped) 

The interior lights automatically turn off
approximately 20 minutes after the igni-
tion switch is turned off.

CAUTION

• To prevent possible damage to

the wipers or windshield, do not
operate the wipers when the
windshield is dry.

• To prevent damage to the wiper

blades, do not use gasoline,
kerosene, paint thinner, or other
solvents on or near them.

• To prevent damage to the wiper

arms and other components, do
not attempt to move the wipers
manually.

OTA040057

INTERIOR LIGHT

CAUTION

Do not use the interior lights for
extended periods when the engine
is not running.
It may cause battery discharge.

WARNING

Do not use the interior lights when
driving in the dark. Accidents could
happen because the view may be
obscured by interior lights.

Summary of Contents for Accent 2012



















































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2012

A-Tach Mounts ST-1 Instructions preview
ST-1
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50291 Quick Start Manual preview
50291
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50206 Instructions preview
50206
Brand: A-Tach Mounts Pages: 2
iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Jabra FREEWAY Datasheet preview
FREEWAY
Brand: Jabra Pages: 2
Jabra BT330 User Manual preview
BT330
Brand: Jabra Pages: 38
OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
Ford FIESTA ST 2019 Supplement Manual preview
FIESTA ST 2019
Brand: Ford Pages: 37
U.S. General 95904 Operating Instructions preview
95904
Brand: U.S. General Pages: 4
Atera 022 681 Manual preview
022 681
Brand: Atera Pages: 10
RAM 4500 CHASSIS CAB 2012 Specification preview
4500 CHASSIS CAB 2012
Brand: RAM Pages: 7
femkes Hopper on Top User Manual preview
Hopper on Top
Brand: femkes Pages: 7
StowAway 2 025.41 Assembly Instructions preview
025.41
Brand: StowAway 2 Pages: 2
Alpitronic Hypercharger HYC 075 Operation Instructions And Installation Manual preview
Hypercharger HYC 075
Brand: Alpitronic Pages: 64
Columbia THERAPEDIC 2000 Instructions For Use Manual preview
THERAPEDIC 2000
Brand: Columbia Pages: 14
Broadfeet RSLX-385-68S Installation Instructions preview
RSLX-385-68S
Brand: Broadfeet Pages: 2
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Brand: Saab Pages: 37
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8

Brands by name

Popular brands

Load more brands