Hyundai Accent 2012 Owner'S Manual Download Page 340

Page: 340 / 370

7 65

Maintenance

High mounted stop light bulb
replacement (if equipped)

4 Door

1. Open the trunk lid.
2. Remove the socket by turning it coun-

terclockwise.

3. Replace the bulb from the socket.
4. Install the socket by turning it clock-

wise.

5 Door

If the light is not operating, have the vehi-
cle checked by an authorized HYUNDAI
dealer.

License plate light bulb replace-
ment

4 Door

1. Remove the trunk trim.
2. Remove the socket by turning it coun-

terclockwise.

3. Remove the bulb by pulling it straight

out.

ORBC070043

ORBC070036

ORBC070041

ORBC070042

ORB071043

Type (LED/Bulb)

Summary of Contents for Accent 2012



















































































































































































































































































































































































Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands

Hyundai Accent 2012, Owner'S Manual

Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands