Hyundai Accent 2012 Owner'S Manual Download Page 337

Page: 337 / 370

Maintenance

4. Remove the bulb by pulling it straight

out.

5. Insert a new bulb in the socket.
6. Reassemble the socket and the lens

part.

7. Connect the bulb electrical connector.
8. Reinstall the light assembly to the

body of the vehicle.

Type B

If the light bulb does not operate, have
the vehicle checked by an authorized
HYUNDAI dealer.

Rear combination light bulb
replacement (4 Door)

(1) Stop and tail light
(2) Rear turn signal light
(3) Back-up light
(4) Side marker

ORB070054

ORBC070033

Summary of Contents for Accent 2012



















































































































































































































































































































































































Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands

Hyundai Accent 2012, Owner'S Manual

Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands