Hyundai Accent 2012 Owner'S Manual Download Page 307

Page: 307 / 370

Maintenance

Front windshield wiper blade

Type A

1. Raise the wiper arm and turn the wiper

blade assembly to expose the plastic
locking clip.

2. Compress the clip and slide the blade

assembly downward.

3. Lift it off the arm.
4. Install the blade assembly in the

reverse order of removal.

Front windshield wiper blade

Type B

1. Raise the wiper arm.

CAUTION

Do not allow the wiper arm to fall
against the windshield, since it may
chip or crack the windshield.

CAUTION

Do not allow the wiper arm to fall
against the windshield, since it may
chip or crack the windshield.

OLM079200

OLM079201

OHM078059

Summary of Contents for Accent 2012



















































































































































































































































































































































































Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands

Hyundai Accent 2012, Owner'S Manual

Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands