Hyundai Accent 2012 Owner'S Manual Download Page 341

Page: 341 / 370

Maintenance

4. Install a new bulb.
5. Install the socket by turning it clock-

wise.

6. Install the trunk trim.

5 Door

1. Using a flat-blade screwdriver, remove

the light assembly from the vehicle by
prying the lens gently.

2. Remove the socket from the lens.
3. Remove the bulb by pulling it straight

out.

4. Install a new bulb in the socket and

install the socket to the lens.

5. Reinstall the lens securely.

Interior light bulb replacement

1. Using a flat-blade screwdriver, gently

pry the lens from the interior light
housing.

2. Remove the bulb by pulling it straight

out.

ORB070065

ORB070064

Front map lamp

Room lamp

ORB071055

CAUTION

Use care not to dirty or damage
lens, lens tab, and plastic housings.

Summary of Contents for Accent 2012



















































































































































































































































































































































































Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands

Hyundai Accent 2012, Owner'S Manual

Search results

Summary of Contents for Accent 2012

Reviews:

Related manuals for Accent 2012

Brands by name

Popular brands