Hyster H40-60XT, Operating Manual

Page: 63 / 180

Legend for Figure 6
A. STANDARD FULL SUSPENSION SEAT
B. STANDARD NON-SUSPENSION SEAT
C. PREMIUM FULL SUSPENSION SEAT
1. HIP RESTRAINT
2. SEAT BELT
3. FORWARD/BACKWARD ADJUSTMENT LEVER
4. WEIGHT ADJUSTMENT KNOB
5. BACKREST ANGLE ADJUSTMENT LEVER
6. RIDE POSITION INDICATOR
5. DO NOT drive a lift truck into an elevator unless author-
ized to do so. Approach the elevator slowly. After the eleva-
tor is properly leveled, the lift truck must be centered so
that the elevator is balanced.
When the lift truck is in the proper position in the elevator,
set the brakes, put the controls in
NEUTRAL and shut off
the power. It is advisable that all other personnel leave the
elevator before the lift truck enters or leaves.
6. Drive carefully, observe traffic rules, and be in
full control of the lift truck at all times. Be com-
pletely familiar with all the driving and load handling
techniques contained in this
Operating Manual .
Driving and Direction Changes
KNOW YOUR TRANSMISSION. These lift truck models are
equipped with a Basic Powershift or Electronic Powershift
transmission. See
Table 3 and Figure 7 . Read the follow-
ing section carefully.
Table 3. Transmissions
Operational Feature
Basic Powershift or
Electronic Power-
shift
Electronic Inching Yes
Operating Procedures
61