Hyster H40-60XT, Operating Manual

Page: 30 / 180

Table 1. Controls (Continued)
Item
No.
Item Function
11
Tilt Control Lever With
RTST
These trucks can be equipped with Return to Set Tilt (RTST) option if truck has man-
ual hydraulic levers. The vertical stop position will be set at the factory. Push the tilt
lever knob switch while moving the mast forward or backward, with a light load, the
mast will return to vertical position. To stop RTST, release the tilt lever knob switch.
RTST is intended as an operator aid in positioning forks or attachments for their appli-
cation to minimize product damage and facilitate load handling. Care should be taken
to operate the truck in accordance with load handling instructions as described in
Operating Techniques on the Operating Procedures section of this Operating
Manual .
12
Manual Control Lever for
3rd Auxiliary Functions
WARNING
A manual control lever with a detent must be installed when an attachment with
a clamp is installed. See your dealer for Hyster lift trucks to get the correct con-
trol lever.
NOTE: Manual hydraulic control levers are standard on the trucks covered in this man-
ual. Optional electronic hydraulic mini-levers are available for the hydraulic functions.
The third control lever is installed to the right of the tilt control lever. This lever can
have two methods of operation, depending on the attachments. The lever is operated
by moving forward and backward.
Model Description
28