Hyster H40-60XT, Operating Manual

Page: 177 / 180

Unloading
If components normally attached to the lift truck were
removed for transport, see the
Service Manual for installa-
tion procedures.
1. If used, remove any protective cover.
2. Make sure the parking brake is applied.
3. Disconnect the straps or chains.
4. Remove the wheel blocks.
5. Check that all switches and accessories are turned OFF .
6. Unload the lift truck.
Preparation for Use
After being transported or stored, the lift truck must be pre-
pared for use for proper operation. All problems must be
corrected before use of the lift truck, see the Service Man-
ual Periodic Maintenance 8000 SRM 2000 for proce-
dures.
Preparation After Transport
1. Complete the unloading procedures.
2. Inspect the lift truck for damage and missing compo-
nents.
3. Follow the steps in the section How to Make Checks
With the Engine Stopped .
Maintenance
175