Hyster H40-60XT, Operating Manual

Page: 13 / 180

Model Description
General
This Operating Manual is for the following models of lift
trucks:
H40-60XT (A380)
These lift trucks are available with the following engine:
• PSI 2.4L engine which uses LPG fuel
• PSI 2.4L bi-fuel engine which uses Gasoline and LPG
fuels
• Yanmar 2.6L engine which uses diesel fuel
• Yanmar 3.3L engine which uses diesel fuel
These lift truck models are equipped with a Basic Power-
shift or Electronic Powershift transmission.
The H40-60XT lift trucks are equipped with pneumatic tires
or solid rubber tires that look like pneumatic tires. See
Wheels and Tires in the Maintenance Section for a
description of these tires.
Operator Protection Equipment
The LOAD BACKREST EXTENSION is installed to keep
loose parts of the load from falling back toward operator. It
must be high enough, with vertical openings small enough,
to prevent parts of the load from falling backward. If a load
backrest extension that is different from the one installed
on your lift truck is required, contact your
Hyster lift truck
dealer.
The OVERHEAD GUARD is intended to offer reasonable
protection to the operator from falling objects, but cannot
protect against every possible impact. Therefore, it must
not be considered a substitute for good judgment and care
when handling loads. DO NOT remove the overhead
guard.
NOTE: The seat belt can be either black or red.
The SEAT BELT AND HIP RESTRAINT provide additional
means to help the operator keep the head and torso sub-
stantially within the confines of the lift truck frame and over-
head guard if a tipover occurs. This restraint system is
intended to reduce the risk of the head and torso being
trapped between the lift truck and the ground, but it cannot
Model Description
11