Hyster H40-60XT, Operating Manual

Page: 134 / 180

Figure 28. Fork Wear
Forks, Install
WARNING
DO NOT try to move a fork without a lifting device.
Each hook fork for these lift trucks can weight 45 to
115 kg (99 to 253 lb).
CAUTION
Remove fork latch pins if adding a fork positioner
attachment. Damage to forks and other carriage com-
ponents can occur if fork latch pins are not removed
prior to using attachment.
NOTE: Forks are to be replaced only in sets and not indi-
vidually.
NOTE: If lift truck is not equipped with a fork positioner, go
to Step 1 . If lift truck is equipped with fork positioner, go to
Step 2 .
1. Move the fork and carriage so that the top hook on the
fork can engage the upper carriage bar. Raise the carriage
to move the lower hook through the fork removal notch.
Slide the fork on the carriage so that both upper and lower
hooks engage the carriage. Engage the lock pin with a
notch in the upper carriage bar. See
Figure 26 .
Maintenance
132