Hyster H40-60XT, Operating Manual

Page: 151 / 180

whether a specific radial tire is approved for use on
Hyster trucks.
1. Put the lift truck on blocks as described in How to Put a
Lift Truck on Blocks at the beginning of this section.
2. Remove the air from the tire. Remove the valve core to
make sure that all of the air is out of the inner tube. Push a
wire through the valve stem to make sure that the valve
stem does not have a restriction.
3. Remove the wheel nuts and remove the wheel and tire
from the lift truck. Lift truck tires and wheels are heavy.
Remove Tire From Wheel
When disassembling wheels, see Figure 34 . There are
several types of wheels used on this series of lift trucks.
See
Tire Removal, Two-Piece Wheel and Tire Removal,
Three- and Four-Piece Wheels .
Maintenance
149