background image

RG2, RGN2

TFG2

RG4, RG8

RGE2, RGEN2

RGE4

TRG2

Instruction and parts manual

Manual Nº:

MA210314-12ENG

Language: ENG

Publishing date:

11-12-2017

Revision: 12

Table of contents

Definitions

 ............................................................................... 2

Note .......................................................................................... 2
Quality Standards/Norms and Directives .......................... 2
Safety ....................................................................................... 3

Identification

 ........................................................................... 4

Assembly ................................................................................. 5
Working with KOOI-REACHFORKS® .................................. 6
Maintenance Schedule......................................................... 6
Wear ......................................................................................... 7
Instructions for Replacement of Sleeve ............................ 8
Replacement of Hydraulic Parts ......................................... 10
Troubleshooting ...................................................................... 12
Replacement parts list RG2, RGN2 ...................................... 14
Replacement parts list TFG2 ................................................ 15
Replacement parts list RG4 .................................................. 16
Replacement parts list RG4 .................................................. 18
Replacement parts list RG8 .................................................. 20

Replacement parts list RG8 (cont’d) ................................... 21
Replacement parts list RGE2, RGEN2 ................................. 22
Replacement parts list RGE4 ................................................ 23
Replacement parts list TRG2 ................................................ 25

Summary of Contents for KOOI-REACHFORK RG2



























Reviews:

Related manuals for KOOI-REACHFORK RG2