background image

REE2-17, 24

RIE2-17, 19

REE4-17 

  

IKEA

Instruction and parts manual 

Manual Nº:

WO19021504ENG

Language: ENG

Publishing date:

22-06-2017 (original manual)

Revision: 04

Index

Definitions

 ............................................................................... 2

Note .......................................................................................... 2
Quality Standards/Norms and Directives .......................... 2
Safety ....................................................................................... 3

Identification

 ........................................................................... 4

Assembly ................................................................................. 5
Working with KOOI-REACHFORKS® .................................. 6
Maintenance Schedule......................................................... 6
Wear ......................................................................................... 7
Taking goods from the racking ............................................ 8
Loading goods into the racking ........................................... 9
Instructions for Replacement of Sleeve ............................ 10
Replacement of Hydraulic Parts ......................................... 11
Troubleshooting ...................................................................... 14
Replacement parts list REE2 ................................................ 15
Replacement parts list sleeves REE2 ................................. 16

Summary of Contents for KOOI-REACHFORK REE2-17

















Reviews: