Hypertherm Edge TI, Manual

Page: 515 / 574

MicroEdge™ 491
THC and Joystick Interface
MicroEdge® has dedicated connectors for THC 1, THC and Joystick / Speedpots.
Series 1 PCI Analog Card
Note : The Analog Card will be designated as PCI-AIC Rev A in the Control Information Diagnostic
screen.
Board Marking PCI Analog 1 Part # PCBS-0074
THC 1
Pin #
Designation Description
1 Common Common
2 Input 5 + Nozzle Contact Sense + ( Relay Contact )
3 Input 5
–
Nozzle Contact Sense - ( Relay Contact )
4 Output 1 + Nozzle Contact ( Relay Contact )
5 Output 1
–
Nozzle Contact Enable - ( Relay Contact )
6 Analog Input 1 + THC +
7 Analog Input 1
–
THC
–
8 Output 2 + Hold Ignition ( Relay Contact )
9 Output 2
–
Hold Ignition ( Relay Contact )
Ground Stud Shield
Mating Connector
Connector AMP #206708-1
Backshell AMP #206966-1
Sockets (20-24 ga) AMP #66105-3
Cabling: Use Belden # 9504 or equivalent
THC 2
Pin #
Designation Description
1 Common Common
2 Input 6 + Nozzle Contact Sense + ( Relay Contact )
3 Input 6
–
Nozzle Contact Sense
– ( Relay Contact )
4 Output 3 + Nozzle Contact ( Relay Contact )
5 Output 3
–
Nozzle Contact Enable
– ( Relay Contact )
6 Analog Input 2 + THC +
7 Analog Input 2
–
THC
–
8 Output 4 + Hold Ignition ( Relay Contact )
9 Output 4
–
Hold Ignition ( Relay Contact )
Ground Stud Shield
Mating Connector
Connector AMP #206708-1
Backshell AMP #206966-1
Sockets (20-24 ga) AMP #66105-3
Cabling: Use Belden # 9504 or equivalent