Hypertherm Edge TI, Manual

Page: 125 / 574

Files 101
Upload to Host
The following screen is used to upload a part to a host computer. Once all the parameters below are
set, press ENTER on the keyboard to start the upload.
Upload to
The Upload to list selects which directory on the host computer that you want to upload to. To add or
remove a directory, double click on the touch screen where indicated.
Keypad operation: To select a different directory, use the

and

keys on the keyboard. To add a
new directory, use the + key on the keyboard. To remove a directory, use the - key on the keyboard.
Remote file name
The Remote file name is the name you want the file that you are uploading to have on the host
computer.
Upload from
The Upload from list selects whether you upload the current part in memory or from a directory on the
local hard disk. If you select one of the local directories, the following fields are available: Files, Local
file name and Preview. To add or remove a directory, double click on the touch screen where
indicated.