Hypertherm Edge TI, Manual

Page: 375 / 574

Password Setups 351
User Level
This feature is used to adjust view screens and what features are available for use based on operator
experience level. The intermediate level provides a larger preview area and an ALT soft key to
access additional screens.
File Extensions
The parameter allows the user to enter the file extensions of the part files that will accepted at the
control.
Adding Folders
This parameter determines whether the control operator has the ability to add Folders from the parts
directory on the control or the host computer.
Deleting Folders
This parameter determines whether the control operator has the ability to delete Folders from the
parts directory on the control or the host computer.
Deleting Files
This parameter determines whether the control operator has the ability to delete Folders from the
parts directory on the control or the host computer.
Mapping Drives
This parameter determines whether the control operator has the ability to map to external drives from
the control through the optional Network feature.
Configuring Watch
When enabled, this parameter will allow the control operator to change the selected items in the
Watch Window.
Adding Processes
This feature allows the user to add new processes to the Laser cut charts when enabled.
Removing Processes
This feature allows the user to remove processes to the Laser cut charts when enabled.
.
Force Simulation
When activated, this feature will force the control into a simulation mode that will allow the control to
operate with motioned disabled and I/O feedback enabled.
Temperature
The Temperature parameter allows the user to select that the internal control temperature be
displayed in Fahrenheit or Celsius in the Watch Window.
Note: Not available for all control types and optional control hardware required.