Hydronix Hydro-Control VI, Installation Manual

Page: 78 / 104

RS232 Interface Chapter 6
78 Hydro-Control VI Installation Guide HD0455 Rev 1.9.0
Below is a list of parameters and their respective units. Certain commands have been changed
or are no longer used. These are shown for backwards compatibility. Command 40 onwards
are new commands for the HC06.
Parameter Description Units RS232 Value Actual Value
4 First Mix Time Seconds 10 10
5 Cement Timeout Seconds 10 10
6 Pre-wet Water Seconds, Litres,
US Gallons,
Weight
250 25.0
7 Moisture Target % 65 6.5
8
Pre-set Water Total
(Previously Pre-set
Final)
Seconds, Litres,
US Gallons,
Weight
300 30.0
9 Pre-wet water limit Seconds, Litres,
US Gallons,
Weight
1200 120.0
13 Final Mix Time Seconds 15 15
14 Plus Tolerance % 10 1.0
15 Minus Tolerance % 3 0.30
17 NO LONGER
USED (was recipe
gain)
N/A N/A N/A
19 Moisture Offset None -36364 -3.6364
20 Moisture Gain None 1817 0.1817
23 Control method (0=
preset, 1 = auto, 2
= calc)
None N/A N/A
24 Dry weight Kg or lbs 2000 2000
25 NO LONGER
USED (was Calc
%)
N/A N/A N/A
26 NO LONGER
USED (was
calibration water)
N/A N/A N/A
27 Water Limit Seconds, weight,
Litres or US
Gallons
500 50.0