Hydronix Hydro-Control VI, Installation Manual

Page: 47 / 104

Chapter 4 Commissioning
Hydro-Control VI Installation Guide HD0455 Rev 1.9.0 47
This screen lists the currently configured recipes in the Hydro-Control. Selecting one of these
by pressing the text in the list box and then pressing the Edit Recipe button displays the recipe
editor.
7.2
The Recipe Editor – Page 1
The first screen has the recipe details, the water addition and the material addition/mixing times.
Figure 35: The recipe editor - page 1
Recipe Details
Parameter Units Default Range
Recipe Number None 1 1 – 99,999
Batch Number None 0 0 – 99,999
Recipe Name Free Text Entry 25 characters length
The Recipe Number parameter is the number of the recipe in the system. Recipes can be
selected by number from an external batch control system by using the 8 digital recipe inputs
(available on the optional Hydro-Control VI Expansion Board) or by using the serial
communications protocol. They are also listed in numerical order on the recipe selector
available from the start page, or from the recipe overview screen.
The
Batch Number
parameter is a number that increments after each batch of a recipe is
completed. It can be used to trace a batch that has been made.
The
Recipe Name
is a free text entry field of up to 25 characters that can be used to give a
meaningful name to the recipe which is displayed in the recipe selection box and on the main
screen.