HydroMassage Owner’s Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 17 of 33
HydroMassage
®
Touchscreen Installation
(This section only applies to L440 series)
1) Remove Touchscreen from the box and unwrap the Touchscreen Pole and open supply boxes
2) Identify all component on previous page
3) Attachment the Touchscreen mounting pole into Lounge frame
•
Touchscreen is typically installed on the side of the Lounge adjacent to a wall.
•
Secure using the supplied bolts and black knobs. (top knob on inside, bottom knob on the outside)
•
Mounting bolts and
black knobs
Secure wires and communication cable as
shown with supplied tie wraps
Secure the communication
cable with the clips on top of
the control box
Plug the communication
cable into the #4 port on the
side of the control box
