HydroMassage Owner’s Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 11 of 33
9. Remove the 2 shipping screws from the ramp at the head end of the Lounge and place the ramp as
shown.
10. Removing the Lounge from the shipping skid.
Carefully lift the foot end of the Lounge up by the handle
until the Lounge is on the very back 2 rollers as shown below.
Slowly roll the Lounge towards and down the ramp at the head end of the skid until the Lounge has cleared the
mounting blocks. You can then lower the Lounge down onto the 4 casters on the bottom of the frame.
