HydroMassage Owner’s Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 33 of 33
STEPS TO REBOOT HYDROMASSAGE
1. Unplug the HydroMassage 220V electrical cord from wall outlet
2. Shut down / turn off the Touchscreen monitor by pressing the blue power
button (Top back right-hand corner of the Touchscreen)
3. Reboot the Touchscreen by pressing the blue power button again, and wait
for the HydroMassage software to automatically load on the Touchscreen monitor
4. Once the HydroMassage software loads on the Touchscreen, and only after you see a “Establishing
Communication” box pop-up, plug the HydroMassage 220V electrical cord back into the wall outlet.
5. Wait approximately 45 seconds to finish initializing. Call Tech Support with any questions.
