HydroMassage Owner’s Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 20 of 33
HydroMassage
®
Initial Start-up
1) Make sure HydroMassage power cord is NOT plugged into 220V outlet.
If the Touchscreen is not
turned on, the Lounge should never be plugged in at the 220V electrical outlet.
2) Underneath Lounge, check to ensure two PVC pump unions are tight.
•
Prior to adding water, do a quick check of the PVC unions (connections on both sides of the black
pump) underneath the Lounge to make sure they did not loosen during shipment. (See Photo in 5)Turn
clockwise to tighten **Do not need to turn Lounge on its side.
3) Unscrew small PVC breather tube, and screw the large PVC Water Filler Tube (found in Parts
Supply Box) into the foot end of the tank to add water.
4) Add first 5 gallons of water ONLY (of the total 20 gallons to be added)
5) With the first 5 gallons of water in the tank, re-inspect PVC fittings underneath Lounge to ensure all
fittings are tight. Also, tighten 18 black knobs at under the top edge of tank frame.
6) Press and hold power button on Battery Backup to turn on power to Touchscreen
Water
Filler
Tube
Breather
Tube
