HydroMassage Owner’s Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 25 of 33
HydroMassage
®
Post Installation
1) HydroMassage
Usage
•
Ensure all staff / customers are familiar with basic HydroMassage operation and functionality
•
The pillow should be positioned at the top of the user’s shoulders to reduce noise. The pillow may be
removed to massage head and neck. Using headphones (or ear buds) during the massage will also
significantly reduce noise.
•
For shorter users, the upper / lower massage limits should be adjusted to ensure the massage area
does not extend below the feet or above the head.
•
During the massage, users may rotate the body to massage different muscle groups on all four sides of
the body.
2) Touchscreen
Usage
•
For videos on the Touchscreen, double-tap the screen to expand the video to full screen. Double-tap
again to return the video to normal play mode.
•
The music and video screens can be minimized by touching the massage control section of the screen
during the massage
3) Setting Usage Defaults
•
The Administrator code on the Touchscreen to access the Default Screen is 120700.
•
Default settings for 1) Massage time, 2) massage pressure, 3) massage area limits, 4) water
temperature, and 5) massage speed may be set here.
4) Cleaning / Maintenance
•
Recommended Maintenance Schedule may be found online and on the last page of the manual:
http://www.hydromassage.com/Maintenance-Tips.htm
•
Lounge cover sheet is waterproof and may be cleaned with antibacterial wipes or spray. It is not
necessary, but the cover sheet may also be machine washed but do not machine dry.
•
Defoamacide and water filler tube are attached to the frame at the foot end of the Lounge.
•
Customer should understand how to remove the side and end panels, and be able to identify the key
components (pump, electrical box, breakers, pressure valve, drive motor, cooling system, rubber
barrier, and drain).
5) Troubleshooting
•
If the pressure unexpectedly rises and falls during the massage, add 2 teaspoons of Defoamacide.
Recommended Maintenance instructions suggest doing this every 3 months. This is also a good time
to clean the machine if maintenance has not been performed in the past 12 months.
•
The HydroMassage Lounge should be rebooted at least 1X per week. This often resolves any minor
software issues. See the Maintenance Schedule either on-line or on last page of the manual.
6) Electrical
Usage
•
Average watts of electricity used during a 15-minute session is 3700 watts (3.7KW). At lower pressure
levels, the average watts used is approximately 2500 watts (2.5KW) if the cooling system is not in use.
At higher pressure levels with the cooling system is engaged, the electricity used is approximately 5000
watts (5KW). In the USA, average electricity cost for a 15-minute session is $0.06. When not in use,
the system uses approximately $2.00 in electricity per month to maintain temperature.
7) Paperwork
•
Customer Acceptance document should be signed and returned to HydroMassage after installation.
This completes installation and set-up of the HydroMassage Lounge
