HydroMassage Owner’s Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 32 of 33
Pivot screws
HydroMassage Maintenance Schedule
Weekly:
1. Reboot the HydroMassage (instructions below).
2. Clean waterproof cover sheet according to your normal cleaning procedures for all other equipment.
Every 3 Months:
1.
Add Defoamacide to ensure the water pressure stays consistent and clean. **ONLY USE
HydroMassage Defoamacide.**
2.
The Defoamacide and will be attached to the frame at the foot of the Lounge. Unscrew the cap on the
fill spout and add Defoamacide with Distilled water. (see below for amounts) Replace the Fill Spout
Cap.
a.
Add 2 teaspoons with 2 gallons distilled water if LESS than 30 massages per day usage
b.
Add 2 teaspoons with 3 gallons distilled water if MORE than 30 massages per day usage.
3.
Check Touchscreen pivot screws (2). Tighten with 5/32 hex key wrench if needed to secure
Touchscreen in place. Do not over tighten (restricts the motion of the Touchscreen).
Every 12 Months:
1.
Drain and clean Lounge. Replace the distilled water and add 2 teaspoons of Defoamacide.
Instructions included both in the manual and on line
2.
Add 20 gallons of DISTILLED WATER. Replace the rubber barrier. Call 727-536-5566 for assistance
3.
Remove and wash filter for internal cooling system intake (if applicable) every 3-6 months as needed.
Remove
screws and
take off end
panels
Fill Spout
Screw Cap
