background image

 

HydroMassage Owner’s Manual, Revision 10-25-15 

JTL Enterprises, Inc  1-727-536-5566  •  www.HydroMassage.com 

Page 28 of 33 

1) Administrator 

Options

.  The Administrator Menu is for performing functions that should not be accessed 

by massage users.  To access this menu, press and hold the “HOLD” button on the main screen for 5 
seconds then enter the HydroMassage Administrator Code (120700).  The Administrator Default windows 
will open. Once you exit the Administrator Menu, you must re-enter the Admin code to gain access to this 
menu again.

 

 

 

a)  Adjusting Defaults.  On the Default Screen, select the new default settings from the High Limit, Low 

Limit, Pressure, Speed, Temperature, and Time drop-down boxes.  This will allow you to set the 
defaults to meet the needs of the largest percentage of your users to save time while setting up 
sessions.  Click Close to return to the Main Menu.  When starting a session, if a user does not alter the 
pressure, speed, time, or limits, the massage will always begin at the default settings.

 

 

b)  Operational Modes.  Normal/None should always be selected unless an external timer is to be used.  

When hooking up an external timer, the following two options may be selected.  

*For either option, 

make sure the contact closure is continuity only. See External Timer Connection Section for 
more details. 

(1)  Pulse.   The Lounge will run for the number of pulses it receives from the timer (usually a dollar 

bill reader multiplied) by the Pulse Value (minutes).   

(2)  Close Contact.  The Lounge will run as long as contacts in the external timer are closed.  (T-

Max 3A timer or other similar device)

 

 

c)  User Log-In checkbox.  When this box is checked, the Lounge may not be operated without first logging 

in with a password.  See User Log-In Menu below.  This is only used when session time needs to be 
controlled.

 

 

d)  Member Management. This is very valuable tool if you would like to generate recurring revenue from 

your HydroMassage. You can use the Member Management System to sell packages by, the minute, 
day, week, or month and limit usage. The information for the members that have access to the 
HydroMassage is kept in the User Database.

 

 

 

Summary of Contents for Lounge 440 Series


































Reviews: