HydroMassage Owner’s Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 12 of 33
HydroMassage
®
Delivery / Moving Lounge to Desired Location
1) Move Lounge to desired location
. Always try to make sure the metal control box is facing toward the
center of the room for easy access.
a) If you must stand the Lounge on end, you must mount the extra casters that are included in the supply
box to the frame at the head end of the lounge after removing the mesh filter as shown below. Always
lift by the handle at the foot end.
b) Use cardboard ring from the shipping box to protect the floor, walls and door threshold and to assist in
sliding the Lounge if necessary.
2) Once the Lounge is in place.
Lower the front leg feet using a 5/8” wrench until they are both firmly on the floor. Lock in place by
tightening the ½” nut up until tight against the leg
3) Put side and end panels back on unit.
Use black thumb screws from Parts Supply Box to secure end panels
Mounting
holes for
extra
casters
½” locking nut
5/8” adjusting nut
